LiquidBK-SV-007
SAMPLE
A fast-evaporating ketone solvent used to dissolve resins, oils and many organic components.
SolventsCAS 67-64-1
PRODUCT CATALOGUE
Solvents
Ester, ketone, alcohol, glycol-ether and hydrocarbon solvents for coatings, printing, cleaning, adhesives and process applications.
LiquidBK-SV-013
SAMPLE
An ester solvent with balanced evaporation and solvency, supporting flow, solubility and drying in coatings and formulations.
SolventsCAS 123-86-4
LiquidBK-SV-014
SAMPLE
A glycol-ether solvent providing compatibility between aqueous and organic phases, controlled evaporation and strong cleaning performance.
SolventsCAS 111-76-2
LiquidBK-SV-015
SAMPLE
A glycol-ether solvent providing compatibility between aqueous and organic phases, controlled evaporation and strong cleaning performance.
LiquidBK-SV-017
SAMPLE
A hygroscopic glycol raw material used as a solvent, humectant, heat-transfer component or process aid.
SolventsCAS 111-46-6
LiquidBK-SV-046
SAMPLE
A hydrocarbon solvent used to dissolve oils, waxes, rubber and selected resins, with fast to medium evaporation.
SolventsCAS 1330-20-7
LiquidBK-SV-049
SAMPLE
A formulated auxiliary chemical group for printing processes, addressing cleaning, viscosity, drying or surface preparation. Exact use must be confirmed from product TDS.
Find products by application
Describe your process to see product candidates and why they match.
SMART TECHNICAL PRODUCT ADVISOR
Describe the requirement and see candidates with evidence.
The advisor only matches verified catalogue fields. Final product, grade and dosage require validation by the technical team using TDS/SDS and site data.
TECHNICAL PRE-SCREEN
Narrow product / substitute candidates from verified data.
This tool does not declare equivalence, safe substitution or dosage. It only compares CAS and structured technical catalogue signals.
CATEGORY GUIDESolvency and evaporation Safety and emissions Material compatibility
Solvents selection guide
Ester, ketone, alcohol, glycol-ether and hydrocarbon solvents for coatings, printing, cleaning, adhesives and process applications. This category page helps compare products by application, technical function and selection criteria. Final grade, purity, active content and regulatory suitability must be confirmed product by product using current TDS/SDS.
Review solvency profile, evaporation rate and water miscibility together with formulation and process time.
Confirm flash, exposure, VOC and ventilation requirements using the current SDS and site procedures.
Validate compatibility with seals, plastics, coatings, resins and equipment surfaces in a controlled trial.
KNOWLEDGE CENTRE
Solvents frequently asked questions
Key points for grade, application, documentation and safe-use assessment in this product group.
Which properties matter when selecting a solvent?
Solvency, evaporation profile, water miscibility, purity, odour, colour, flash and exposure information, and compatibility with contact materials should be considered together.
Can a solvent be substituted directly in an existing formulation?
A direct equivalent should not normally be assumed. Resin or oil solubility, drying time, surface appearance and seal or coating compatibility should be compared in a controlled trial.
Where are VOC or flammability data verified?
Verify them from the current SDS and technical data for the supplied grade. The generic product name is not sufficient for an exact classification or flash point.
How should a solvent trial be conducted safely?
Work at small scale under an approved procedure only after providing suitable ventilation, controlling ignition sources, using required PPE and following the SDS.
What matters for storage and packaging selection?
Review SDS conditions for temperature, ventilation, grounding, incompatible materials and container material together with consumption rate and local storage rules.